基于天线-罩体综合设计的反射面赋形设计方法


      Reflector shaping design based on integrated design of antenna-radome system

      • 摘要:

        介质夹层式天线罩在保护内部天线的同时,使得透过罩体后天线口径场的幅度和相位分布发生变化,其中相位分布的变化是引起天线远场方向图畸变的主要因素文章从天线罩体综合设计的角度出发,提出一种反射面赋形设计方法,通过赋形反射面来改变天线口径场的相位分布,使其与天线罩引起的相位分布的趋势相反,以保证透过天线罩后的口径场仍为同相场对某地面卫星通信站的9.14 m口径天线罩进行了数值实验,结果表明:所提方法可有效改善带罩天线系统的电性能,对于方向图畸变导致的副瓣和零深变化其效果尤为显著.

         

        Abstract:

        Large dielectric sandwich radomes are used to protect antennas at the expense of degrading the electrical performance of the enclosed antennas. The presence of radome affects the amplitude distribution and phase distribution of the antenna aperture field, of which the latter is the main factor in distorting the far field pattern. A novel method based on reflector shaping is proposed to compensate for the effect of radome on the phase distribution of aperture field. This method makes the trend of phase distribution of the antenna aperture field inverse to that of the phase variation caused by radome, thus ensuring that the aperture field after transmitting through the radome is equiphase. A ground-based radome with a diameter of 9.14 m is simulated and the results indicate that the method is effective, especially in compensating for the distortion of far field pattern.

         

      /

      返回文章
      返回